Page 307 - general-catalogue

Dust Pressed Ceramic Porcelain Tiles With Low Water Absorption

TICHNICAL CH.-\R.-\CTIRISTIC EN-14411 Annex G Group Bia Values EGE SERAMiK YALUE TISI STA.l'ffi • .\RD

7 cm ::: ~ < 15 cm ± 0,9 mm
Length and width ±% 0,2 -±% 0,4 ISO 10545-2

~2: 15 cm ± % 0,6 ve ± 2,0 mm

7 cm::: N < 15 cm ± 0,5 mm

Thickness ±% 5 ISO 10545-2
~ > 15 cm ± % 5 ve± 0.5 mm

7 cm :S ~ < 15 cm ± 0,75 mm

Rectangularity ±% 0,2 -±% 0,4 ISO 10545-2
~2: 15 cm ± % 0,5 ve ± 2 mm

7 cm :S :'.',' < 15 cm ± 0, 75 mm

Straightness of sides ±% 0,2 -±% 0,4 ISO 10545-2
:-.;2: 15 cm ±% 0,5 ve ± 1,5 mm

7 cm :S ~ < 15 cm ± 0,75 mm

Center Cm-vature ±% 0,2 -±% 0,4 ISO 10545-2
~ 2: 15 cm ± % 0,5 ve ± 2 mm

7cm:::~ < 15cm ±0,75mm

Edge Cm-vature ±% 0,2 . ± % 0,4 ISO 10545-2
~2: 15 cm ±% 0,5 ve ± 2 mm

7 cm :S ="' < 15 cm ± 0,75 mm
,varpage ±% 0,2 -±% 0,4 ISO 10545-2

~2: 15 cm ± % 0,5 ve± 2 mm

Surface Quality A minimum of 95 %of the tiles shall be free from visible defects that would impair the ISO 10545-2

appearance of a major area of tiles

Ev:::% 0,5 Ev:::% 0,5

Water Absorption ISO 10545-3
Individual max %0,6 lndh,idual max %0,6

min 35~/mm2 min 35~/mm2

Modulus of Rupture ISO 10545-4
Individual min 32 ~ /mm2 Individual min 32 ~ /mm2

Thickness ::: 7 ,5 mm 1300 ~ Thickness ::: 7 ,5 mm 1300 ="'

Breaking Strength ISO 10545-4

Thickness < 7 ,5 mm 700 ~ Thickness < 7,5 mm 700 N

Impact resistance Declared value Test value for each product E~ ISO10545-5

Coefficient of lineer thermal expansion Declared value :::5,81*10~ t°C ISO 10545-8

Thermal Shock Resistance Test method available Resistance ISO 10545-9

Crazing Resistance Required Resistance ISO 10545-11

Resistant NO ALTER."'IATION WITH

Frost Resistance Required ISO 10545-12
100 CYCLES

Min Class LB
Resistance to acids and alkalis As indicated by the manufacturer ISO 10545-13

:Vfin Class HB

Resistance to household chemicals and
Min Class B Min Class B ISO 10545-13
swimming pool salts

Resistance to Staining ?.fin. Class 3 Min. Class 3 ISO 10545-14

Pb-Cd Declared value Test value for each product E~ ISO10545-15

Scratch Hardness min 5Mohs min 5 ?.'lobs E~ 101

A. "'ISi / :'.','FSI

Wet Dynamic Coefficients Of Friction As indicated by the manifacturer Test value for each product
B101.3-2020

Sliperry Resistance As indicated by the manifacturer Test value for each product D~51130

BS 7976-1:2002 + Al 2013
Pendulum Declared value Test value for each product
/ SIi 2279

305